TG2421AL_2422AL(e).book Page 29 Tuesday, March 15, 2005 6:29 PM
Programmable Settings
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each item can be found on the corresponding pages. To programme, press {MENU}, press {V} or {^} to scroll through the menu, and press {>} or {Select} when the desired menu item or setting is displayed.
Important:
LBefore programming, make sure the handset and base unit are not being used. The handset must be operated near the base unit and while off the base unit or charger.
Main menu |
| Page | |
Ringer setting | Ringer volume | – | page 30 |
| Ringer tone | – | page 30 |
| Interrupt tone*1 | – | page 31 |
Voice enhancer | – | – | page 31 |
Dial lock*2 | – | – | page 33 |
Copy phonebook*1 | Copy 1 item | – | page 22 |
| Copy all items | – | page 23 |
Initial setting | LCD contrast | – | page 32 |
| Key tone | – | page 34 |
| Auto talk | – | page 31 |
| Set area code | – | page 33 |
| Set tel line | Set dial mode*2 | page 42 |
|
| Set recall time*2 | page 32 |
|
| Set line mode*2 | page 32 |
| Registration | – | page 34 |
*1
*2 If you programme these settings using one of the handsets, you will not need to programme the same item using the other handset
Note:
LTo exit programming, press {OFF} at any time.
LTo go back to the previous menu, press {<} or {Back}, or press {>} or {Select} while “(Go back)” is displayed.
29
