VCN Access Point Menus 47

When you discard the operation, the message appears:

The action has been canceled

Setting External Loopback Mode

To set external loopback mode, type 3 and press <Enter>. The message appears:

This action will change the working mode of Ethernet!

Do you want to proceed (Y/[N])? :

To confirm type y; to discard, type n; and and press <Enter>. When you proceed, the message appears:

Action has been done.

When you discard the operation, the message appears:

The action has been canceled

Setting Normal Mode

To set normal mode, type 1 and press <Enter>. The message appears:

This action will change the working mode of Ethernet!

Do you want to proceed (Y/[N])? :

To confirm type y; to discard, type n; and and press <Enter>.

When you proceed, the message appears:

Action has been done.

When you discard the operation, the message appears:

The action has been canceled

Normal mode is both lack of loopbacks and half duplex operation.

Setting Duplex Mode

To change the duplex mode to full, type 4 in the Change Work Mode Menu, and press <Enter>. The messages appear:

Page 47
Image 47
3Com DSA-3CV1001-02 service manual When you discard the operation, the message appears, Setting External Loopback Mode