52CHAPTER 4: USING THE LOCAL MANAGEMENT ACCESS
To reject, press <Enter> or type n and press <Enter>. The Management
Menu reappears.
To proceed type y and press <Enter>; the message appears:
The system is going down...
The Operation Mode Selector Menu (Figure 44) appears.
Figure 44 Operation Mode Selector Menu
********************************************************
3Com NCD. (C)
Date: Jun 15 1999, Time: 16:13:31
CPE modem Operation Mode Selector.
Enter:
S - | for Serial loading | OR | ||
D - | for Debug operation | OR | ||
F | - | for | SW execution from the Flash OR | |
C | - | for | MAC address programming. | |
********************************************************
If this menu is ignored for 5 seconds, execution from the flash begins and the messages in Figure 45 through Figure 47 appear. This is the default option F.
Option C is for entering the MAC address. This is normally performed in the factory.
Option D is for debugging. This option is for developers only.
Option S is for downloading software through the LMA port. For more information see Appendix C Loading Software Through Local Access.
To use an option, type its letter.
To continue with the reset operation without performing the other options, do one the followin steps:
■Wait 5 seconds.
