3Com DSA-3CV1001-02 Table the lower surface of a table, as in Figure, VCN AP without Curved Cover

Installing the VCN Access Point 27

12Reinsert the curved cover by reversing the sequence of step 2. See Figure 14 and Figure 15.

Figure 14 VCN AP without Curved Cover

Figure 15 Placing Curved Cover on VCN AP

Mounting the VCN Two screws support the rear side of the VCN AP and an additional screw Access Point Under a is used to fasten its front. Find an appropriate location for the VCN AP on

Table the lower surface of a table, as in Figure 16.