3Com DSA-3CV1001-02 Describes the LEDs and connectors on the front panel, Type State Used to

VCN Access Point Features 15

Figure 4 The VCN AP Unit Front View

E TH ER N ET

F a x-M o d em

in e	o w e r
L	P

Local Management Connector (hidden)

Ethernet Ethernet Fax-Modem Line LED Power LED

LED port port

Table 3 describes the LEDs and connectors on the front panel.

Table 3 The VCN Access Point LEDs and Connectors - Front View

Item	Type	State	Used to
Ethernet	LED	Green	Indicate connection of the VCN AP to a PC
Ethernet	RJ-45	-	Connect the VCN AP to a PC
Fax-	RJ-11 port	-	Connect a fax machine or a fax modem of a PC
Modem			for sending/receiving faxes or making dial-up
			data transfers.
Line	LED	OFF	indicate VCN AP is not connected to the line
		Green	Indicate connection of the VCN AP to the VCN
			AC
		Flashing	Indicate data transmission to the VCN AP
		in Green
Power	LED	OFF	Indicate that the VCN AP is not powered
		Orange	After 30 seconds, indicate that the
			power-on-self-test (POST) failed
		Green	Indicate that the VCN AP is functional
LMI	4-pin	-	Connect the ASCII terminal for monitoring and
	MiniDin		troubleshooting.
	connector
	(hidden)

Figure 5 displays the back panel of the VCN AP.