3Com DSA-3CV1001-02 service manual Receiving Data Traffic, Receiving Faxes

36CHAPTER 3: INSTALLING AND OPERATING THE VCN ACCESS POINT

3If the telephone set has an additional RJ-11 port, it can be used independently of the VCN AP for fax. Connect an RJ-11 cable between the fax machine or the PC fax modem to the PC RJ-11 port on the VCN AP.

Sending and To send or receive data traffic:

Receiving Data Traffic

1Connect a RJ-45 cable between the Ethernet port and the PC Ethernet card.

NOTE: No password or account number specific to the local ISP is needed, however, your normal log-in procedure should be observed, including access privileges like user ID, password, etc.

2Run your network application: browser, e-mail etc.

Sending and You can make a fax call without connecting the VCN AP to power.

Receiving Faxes

To send or receive faxes:

1Connect a RJ-11 cable between the fax machine or the PC fax modem and the VCN AP Fax-Modem port.

2Use the fax machine and the telephone set in accordance with the fax machine user manual.

3If the telephone set has an additional RJ-11 port, it can be used independently of the VCN AP for fax or modem. Connect an RJ-11 cable between the fax machine or the PC fax modem to the PC RJ-11 port.