2

SAFETY INFORMATION

This chapter provides safety information in English, French and German.

The topics covered in this chapter are:

Safety Precautions

Précautions de sécurité concernant le VCN Access Point

Sicherheitsvorkehrungen für den VCN Access Point

Safety Precautions The following safety precautions should be taken before installing the VCN Access Point:

To reduce the risk of electrocution and fire:

All servicing should be undertaken only by qualified service personnel. There are no user serviceable parts in the unit.

Do not plug in, turn on or attempt to operate an obviously damaged unit.

DO not operate the unit in a location where the maximum ambient temperature exceeds 40 degrees C.

Be sure to unplug the power supply cord from the wall socket before attempting to remove and/or replace the unit.

The power supply provides for automatic selection of either 100-120 Vac or 200-240 Vac, 60/50 Hz, as indicated on the safety label adjacent to the power inlet. Ensure that the available voltage supply at the mains is within one of these two ranges.

Use only the special power adapter supplied with the unit.

Page 17
Image 17
3Com DSA-3CV1001-02 service manual Safety Information, To reduce the risk of electrocution and fire