3Com DSA-3CV1001-02 service manual Lin e W e r

Installing the VCN Access Point 29

Figure 18 Removing Curved Cover

E TH E RN E T

Screw hole

Fax-M odem Lin e P o w e r

All three holes in the VCN AP are plugged.

3Remove the plugs from the two large holes by prying them out with the tip of your screwdriver.

4Remove the plug from the small front hole by forcing it out from the bottom with a pointy instrument (for example, a nail).

5Where the crosshairs of the template holes intersect, indent the surface with a sharp tool (for example, a nail).

6Remove the template. See Figure 17.