3Com DSA-3CV1001-02 service manual Preparing VCN AP for Table Top Use

Installing the VCN Access Point 33

To mount the VCN AP on top of a table perform the following tasks:

1Stick the four rubber pads to the bottom of the VCN AP as shown in Figure 24.

Figure 24 Preparing VCN AP for Table Top Use

Attach Four R ubber P ads

Lo cal	R e ar
M an age m en t
	P a nel
S e ctio n

2Turn the VCN AP over and place it on top of a table near the ac power and telephone sockets in the room.

Connecting the VCN To enable VCN AP operation, connect the following from the rear of the AP unit:

■Connect the RJ-11 cable coming out from the telephone set to the VCN AP PHONE port at the front.

■Connect an RJ-11 cable from the VCN AP LINE port to the wall telephone socket.

■Connect the ac/dc adapter to the DC-IN port in the VCN AP and to the ac power socket in the room.

The resulting connections are illustrated in Figure 25.