Maytag W10239207B Maintenance Instructions, Technical Specifications GAS Dryer

MAINTENANCE INSTRUCTIONS

Maintenance instructions:

■Clean lint screen after each cycle.

■Removing accumulated lint (disconnect dryer from electricity and gas supplies before starting this task):

•From inside the dryer cabinet:

Lint should be removed every 2 years or more often, depending on dryer usage. Cleaning should be done by a qualified person.

•From the exhaust vent:

Lint should be removed every 2 years, or more often, depending on dryer usage.

If dryer does not operate, check the following:

■Electric supply is connected.

■Circuit breaker is not tripped or fuse is not blown.

■Door is closed. Listen closely to hear door switches activate.

■Selected cycle button has been pressed firmly and display shows cycle time.

■Check that gas supply shutoff valves are set in open position.

If you need assistance:

Contact your authorized Maytag Commercial Laundry distributor or visit: www.MaytagCommercialLaundry.com.When you call, you will need the dryer model number and serial number.

Both numbers can be found on the serial-rating plate located on your appliance.

TECHNICAL SPECIFICATIONS - GAS DRYER

220-240V~50Hz 1ph 3A max. IP24 Clothes capacity: 9.0 kg max. Sound pressure level, Lpa: 58 dBA

(uncertainty, Kpa: +/–10 dBA) Total mass: 68 kg max.

Factory set for NATURAL GAS: Injector size: 2.2 mm Heat input gross: 5.9 kW

European Country:	CH, CZ, CY, ES, GB, GR, HR,		CY, CZ, DK, EE, FI, GR, HU, IT,
	IE, IT, PT, SI, SK, TR		NO, RO, SE, SK, TR
European Gas Category:	II2H3+		II2H3B/P
Gas Flow Rate:	0.562703 m3/hr		0.562703 m3/hr
Supply Pressure (G20):	20 mbar		20 mbar
Factory Adjusted Pressure:	7.4 mbar		7.4 mbar
With LP Gas Conversion Kit: Injector size: 1.25 mm Heat input gross: 6.4		kW
European Country:	CH, CZ, CY, ES, GB, GR, HR,		CY, CZ, DK, EE, FI, GR, HU, IT,
	IE, IT, PT, SI, SK, TR		NO, RO, SE, SK, TR
European Gas Category:	II2H3+		II2H3B/P
Butane Supply Pressure (G30):	28-30 mbar		30 mbar
Adjusted Pressure:	N/A		N/A
Propane Supply Pressure (G31):	37 mbar		30 mbar
Adjusted Pressure:	N/A		N/A
With France/Belgium NATURAL GAS conversion kit: Injector size: 1.65 mm			Heat input gross: 5.9 kW
European Country:	FR, BE
European Gas Category:	I2E+
Supply Pressure (G20):	20 mbar
Supply Pressure (G25):	25 mbar
Adjusted Pressure:	N/A

NOTE: Conversion kit: From Natural Gas to LP Gas: Whirlpool Part No. W10233219.

Conversion kit: From Natural Gas to Natural Gas - France/Belgium: Whirlpool Part No. W10184947. Manufacturer: Whirlpool Corporation, 1300 Marion-Agosta Rd., Marion, OH 43302, USA.

EU representatives: Maytag UK Ltd., 2 St. Annes Blvd., Redhill, RH1 1AX, UK

& Bauknecht Hausgeräte GmbH, D-73614 Schorndorf, Germany

10