This dryer is supplied/fittedwithan electricity supplycordand plug. It should be connectedto electricitysupplysocketat the voltageshown on the rating plate. The minimumsupplyfusecapacity shouldbe 5A. The dryer must be positionedso thatthe plugis clearlyvisibleand accessible. This plug alsoprovidesthe function of an emergencystop control forthe user.If the fittedplug is notused, theelectricalconnection must be carriedout by a competentelectrician in accordancewithlocal or nationalcodes.

If the supply cord is damaged, it must be replaced with a specially terminated cord by an authorizedserviceagentor a similarlycompetent person in orderto avoid a hazard.

Do not use an adapter.

Do not use an extensioncord.

NOTE: In accordancewith theEuropeanEMCDirective(2004/108/EC), themaximumelectricity supplysystemimpedanceto whichthegas dryer should be connectedis declaredto be 0.054Ohm+ j0.034Ohm.

NOTE:Electrical safetystandards:The manufacturerhas chosencompliance withIEC/EN.60335 standardsas themostappropriateforthisproduct.

Using the universal cord included with this dryer:

The gas dryer is equipped with a universal cord with interchangeable plugs.

1.To use the universal cord, select the plug end that fits your electrical outlet, and plug it into the adapter on the supply cord.

2.Secure the plug end in place on the cord by aligning the 2 cover halves over the cord adapter and clipping them together.

Gas Supply Requirements

If codes permit and an additional earth bond wire is used, it is recommended that a qualified electrician determine that the earth bond path is adequate.

EARTHING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

IMPORTANT: Observe all governing codes and ordinances.

Gas Supply

Before installation, check that the local gas distribution conditions, nature of gas and pressure, and the adjustment of the appliance are compatible. Burner information will be found on the model/serial rating plate in the door recess of the dryer. If this information does not agree with the type of gas available, see your dealer.

6

Page 6
Image 6
Maytag W10239207B installation instructions Gas Supply Requirements, Using the universal cord included with this dryer