Maytag W10239207B installation instructions Reverse the strike, Reinstall the door

5.Place the inner door assembly inside the outer door assembly. To fit correctly,the inner door assembly edge fits completely inside the outer door assembly edge.

6.Reassemble the inner and outer door assemblies with the 6 screws.

Reverse the strike

1.Use a small flat-blade screwdriver to remove plug strip from the dryer door opening. Slide the head of the screwdriver under the plugs, being certain not to scratch the dryer surface. Lift the plastic strip from the dryer slowly to avoid distortion of the plug strip.

B.

A.

A. Plug strip

B. Door strike

2.Remove the strike using a Phillips screwdriver.

3.Insert strike on the opposite side.

Reinstall the door

1.Reattach door to dryer front panel with the 4 screws. Partially install the screw with keyhole opening first, and fit the keyhole opening in the hinge over the screw. Then install the remaining 3 screws and tighten all 4 screws.

A.

Install this screw first

B.

A.Dryer front panel

B.Door assembly

2.Check for fingerprints on the glass. Clean glass if necessary.

3.Close door and check that it latches securely.

12