TG2421AL_2422AL(e).book Page 34 Tuesday, March 15, 2005 6:29 PM
Programmable Settings
To turn dial lock off 1 Press {MENU}.
2 Scroll to “Dial lock” by pressing {V} or {^}, then press {>}.
3 Enter the same password that was entered when dial lock was turned on.
4 Press {Save}.
5 Press {Yes}.
L“Dial lock off” will be displayed.
6 Press {OFF}.
Note:
LIf you forget the password, consult your nearest Panasonic service centre.
Handset key tone
You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones. The default setting is ON.
1 Press {MENU}.
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3 Scroll to “Key tone” by pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select “On” or “Off”.
5 Press {Save}, then press {OFF}.
Re-registering the handset
If “No link to base. Move closer to base, try again.” is displayed even when the handset is near the base unit, you may need to
Important:
LMake sure the base unit is not being used.
LHave the handset and base unit near each other when
Confirm the extension number of the handset which has lost the communication by placing the handset on the base unit or charger.
If you
1 Handset:
Press {MENU}.
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing {V} or {^}, then press {>}.
4
Press and hold the handset locator button that corresponds to the handset you want to
LAfter the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute.
5 Handset:
Press {OK}, then wait until the handset beeps.
LRegistration is complete.
34
