Record mode
Self-timer recording
You can record still pictures on a card using the timer.
≥Set to Card Recording Mode.
1Press the joystick to display the icon. Move the joystick down until icon 1 appears.
2Move the joystick left to select the 
].
1 
≥The
3Press the Photoshot button [
].
≥After the [
] indication flashes for approx. 10 seconds, recording will start. After
recording, the self-timer will be canceled.
≥If you press the Photoshot button [
] halfway and then fully, the subject is focused when the button is pressed halfway.
≥When you press the Photoshot button [
] fully, the subject is focused just before recording.
ªTo stop the timer midway through
Press the [MENU] button.
≥The
Wide/4:3 function
This allows you to record images compatible with
Wide Function
Images are recorded with a 16:9 aspect ratio.
4:3 Function
Images are recorded with a 4:3 aspect ratio. ≥Set to Tape/Card Recording Mode.
1Wide Function
Set [BASIC] >> [ASPECT] >> [16:9]. 4:3 Function
Set [BASIC] >> [ASPECT] >> [4:3].
ªTo Cancel the Wide/4:3 Function
Wide Function
Set [BASIC] >> [ASPECT] >> [4:3].
4:3 Function
Set [BASIC] >> [ASPECT] >> [16:9].
≥The default setting is [16:9].
≥In the
appear horizontally oriented.
≥When images are played back on a TV screen, the date/time indication may be erased in some cases.
≥Depending on the TV, the picture quality may deteriorate.
≥If still pictures recorded with a 4:3 aspect ratio are played back when [TV ASPECT] is set to [16:9], part of the operation icons and other displays will appear on the black bands on the left and right of the picture.
≥Concerning the TV to be connected and TV used for playback
≥When playing back images taken by this unit on a TV screen, change the setting established by Tape/Card playback mode [SETUP] >> [TV ASPECT] to match the aspect ratio (4:3 or 16:9) of the TV monitor to be connected.
≥Depending on the settings of the TV connected, the images may not be displayed properly. For more information, please read the operating instructions for the TV.
37
LSQT1091
