With a PC
ªInstallation of Quick Movie Magic/
MotionDV STUDIO
1Insert the supplied
≥Quit all applications. ≥[Setup Menu] appears.
2Click the [Quick Movie Magic]/ [MotionDV STUDIO].
3Click [Next].
≥After reading the displayed contents, please carry out the installation according to
instructions.
4Select the Video system.
5After the completion of setup, click on [Finish].
≥Sample data is installed concurrently with the Quick Movie Magic/MotionDV STUDIO software.
6Click [Finish].
ªTo start Quick Movie Magic or
MotionDV STUDIO
If you wish to capture data from a tape, set the Camcorder to Tape Playback Mode and insert the tape.
If you wish to capture images from the lens of the Camcorder, set the Camcorder to the Tape Recording Mode and remove the tape and the card. (MotionDV STUDIO only)
About the PDF operating instructions for Quick Movie Magic/MotionDV STUDIO
For details on how to use the software applications, read the help file.
1Set [start] >> [All Programs (Programs)] >> [Panasonic] >> [Quick Movie Magic 1.0E] or [MotionDV STUDIO 5.6E LE for DV] >> [Manual (PDF format)].
≥Start Quick Movie Magic/MotionDV STUDIO and select [Help] >> [Help] from the menu to
display the help file.
≥You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions.
With USB cable (supplied)
OS:
Windows XP SP2
Windows 2000 SP4
≥The personal computer should be equipped with an USB terminal
Confirmation before connection (for Windows 2000/XP)
When you connect the personal computer and the Camcorder with the USB cable and then use Quick Movie Magic or MotionDV STUDIO on Windows XP SP2 or Windows 2000 SP4, check the driver of the USB host controller.
≥It is required to use the driver for which [Microsoft] is displayed on [Driver Provider] in
[Driver] tab.
1Select [start] >> [Settings] >> [Control Panel] to start [System].
≥[System Properties] is displayed.
2Click [Hardware] tab and then click [Device Manager] then [Universal Serial Bus Controller].
3
58
LSQT1091
