
With a PC
≥The indication [Enhanced Host Controller] is changed as [EHCI] depending on the host controller you use.
4Click [Driver] tab to check the description on [Driver Provider].
≥If [Microsoft] is displayed on [Driver Provider], the confirmation procedure is completed.
If a description other than [Microsoft] is displayed
≥Update the driver with the following procedure.
1Click [Update Driver...].
2Check [Install from a list or specific location (Advanced)] and then click [Next].
≥When your OS is Windows 2000, click [Next] after [Update Device Driver Wizard] appears.
3(For Windows XP Users)
Check [Don’t search. I will choose the driver to install] and then click [Next].
(For Windows 2000 Users)
Check [Display a list of the known drivers for this device so that I can choose a specific driver] and then click [Next].
4Click [Standard Universal PCI to USB Host Controller] and then click [Next].
5Click [Finish].
≥The update of the driver is completed. Connect the Camcorder.
Connecting the Camcorder to a personal computer
1Set the Mode Dial to Tape Recording Mode or Tape Playback Mode.
2Set [BASIC] or [ADVANCED] >> [USB FUNCTION] >> [MOTION DV].
3Connect the Camcorder to the personal computer with USB cable.
4Select [start] >> [All Programs (Programs)] >> [Panasonic] >> [Quick Movie Magic 1.0E] or [MotionDV STUDIO 5.6E LE for DV] >> [Quick Movie Magic] or
[MotionDV STUDIO LE for DV].
≥Using the MotionDV STUDIO for Windows, a variety of visual effects can be added and titles can be created.
≥You cannot record a video edited by the PC onto the tape in the Camcorder.
≥When 2 or more USB devices are connected to a personal computer or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed.
≥When connected to the keyboard USB terminal, normal function may not be possible.
59
LSQT1091