![](/images/new-backgrounds/1318453/318453119x1.webp)
With a PC
With DV cable (optional)
OS:
Windows 2000/XP
1Set the Mode Dial to Tape Recording Mode or Tape Playback Mode.
2Connect the Camcorder to the personal computer with DV cable.
3Select [start] >> [All Programs (Programs)] >>[Panasonic]>>[QuickMovie Magic1.0E] or [MotionDVSTUDIO5.6ELEfor DV] >> [Quick Movie Magic] or [MotionDVSTUDIO LEfor DV].
≥You can record the video edited by the PC onto the tape in the Camcorder.
Using on Macintosh
ªOperating environment on iMovie 4/
iMovie HD
OS:
Mac OS X v 10.3 to v 10.4
CPU:
PowerPC G3 (400 MHz or higher), G4, G5 Intel Core Duo, Intel Core Solo
Interface:
DV (FireWire) terminal (IEEE1394.a)
≥The supplied
≥iMovie/iMovie HD, included with any new Macintosh or sold with iLife.
1Set the Camcorder to Tape Playback Mode.
2Connect the Camcorder to your Macintosh with the DV Interface Cable (optional).
≥For more information, please contact Apple Computer, Inc. at http://www.apple.com.
ªCopying still pictures on PC
1Set the Camcorder to PC Connection Mode.
2Connect the Camcorder to the personal computer via the supplied USB cable.
3Double-click [NO_NAME] or [Untitled] displayed on the desktop.
≥Files are stored in [100CDPFP] folder in the [DCIM] folder.
4Using a
To disconnect USB cable safely
If USB cable is disconnected while the computer is on, error dialog box may appear. In such a case click [OK] and close the dialog box. By following the steps below you can disconnect the cable safely.
1 Double click the | icon in task tray. |
≥The hardware disconnection dialog box appears.
2Select[USB Mass Storage Device]andclick [Stop].
3Verify [MatshitaDVC USB Device]is selected and click [OK].
≥You can safely disconnect the cable.
Note on the driver name displayed
The driver name displayed will differ depending on your OS, operating environment and the mode of the Camcorder.
≥Make sure Camcorder’s Card Access Lamp is off and disconnect the cable. Also, the icon will not be displayed when in Tape Recording Mode or Tape Playback Mode.
CAUTION:
If you disconnect the USB cable while the Card Access Lamp is on, it may damage the Card data.
If the above operation is not performed correctly, when data is copied from the personal computer to an SD Card, the copied data may be damaged. When the following operations are performed, the same results will occur as when the USB cable is incorrectly removed (above). Therefore, it is imperative that the above operation is completed before proceeding.
≥When SD Card is removed.
60
LSQT1091