Tektronix Phaser 360 Using the Windows NT 3.51 PostScript driver, Setting up installed options

Printing Basics 4

Using the Windows NT 3.51 PostScript driver

If you are using Microsoft Windows NT, follow the instructions in ÒInstalling printer software for Windows NT 3.51Ó on page 3-10 to install a Windows NT PostScript driver with a Phaser 360 printer. You can select printer page sizes in the driver for Windows NT applications, however, TekColor color corrections and other PostScript Level 2 features are not supported by the Windows NT driver. Refer to page 4-3 for instructions on selecting color corrections from the printerÕs front panel or from downloadable utility Þles. Refer to your Microsoft Windows NT documentation for details on features in the Windows NT driver.

Using the Windows NT 4.0 PostScript driver

Setting up installed options

Note If you are not sure which printer options you have installed, the printer’s Startup Page lists some of this information, such as SCSI hard disks. You can print a copy of the Startup Page from the printer’s front panel.

1.From the taskbar, click Start, then Settings and Printers.

2.In the Printers dialog box, click the right mouse button on the

Phaser 360 printer, and select Properties in the menu.

3.From the Properties dialog box, click the Device Settings tab.

4.In the Device Setting sheet, scroll to the end of the list to

Installable Options.

5.Under Installable Options, highlight Optional Lower Tray.

6.In the box that appears at the bottom of the window, click

Installed.

7.Select other options you have installed, such as Optional Hard Drive.

8.Click OK to return to the Control Panel.

User Manual 4-31