Tektronix Phaser 360 user manual Using both thumbs, push the tray in Þrmly until it latches

Caring For Your Printer 7

4.Install the new maintenance tray by sliding it into the printer. Make sure the tray slides in straight on both sides.

9922-38

5.Using both thumbs, push the tray in Þrmly until it latches.

9922-150

6.Close the front cover and wait for the printer to warm up (about 15 minutes).

7.To prevent leaking, seal the used maintenance tray in the plastic bag from the new (replacement) maintenance tray. Treat the used maintenance tray as normal ofÞce waste.

User Manual 7-13