Tektronix Tektronix Color Printer, Phaser 360 user manual Upper Media Tray

8Troubleshooting

Front panel messages (cont'd.)

Message	Action
Upper Media Tray	Add paper or transparencies to the standard media
Empty	tray.
Waiting For Manual	Insert paper or transparency in the manual feed slot.
Feed
Waiting For Paper	The print job specifies paper, but the printer detects
	that the transparency tray is installed switch on the side
	of the tray is set to Transparency. Load paper in the
	media tray and press OK. For printing paper, install
	the paper tray and set the switch to Paper. For printing
	labels in the transparency tray, set the switch to Label.

Waiting For Transparency

The print job specifies transparency, but the printer detects that the paper tray is installed. the tray switch is set to Paper (paper tray) or Label (transparency tray). Load transparency in the media tray and press OK. Pull out the tray, set the switch to Transparency and reinsert the tray.

Waste Liner (A)	Open the front cover, remove the maintenance tray,
Full	and empty the waste liner.

8-4 Phaser 360 Color Printer