Tektronix Phaser 360 user manual Finish Installation Completed dialog box, click Finish

Installing Printer Software 3

13.Enter a name for the printer, and select the Phaser 360 as the default printer if desired, and click Next.

14.Decide if you want to share the printer, Shared or Not shared, and click Next.

If you are installing drivers for platforms other than Windows NT 4.0, for example Windows 95, a message appears during the installation procedure asking for the location of printer Þles. If you see this message, at the prompt, type in the CD-ROM drive followed by \PPDS95NT.DVRTEKMSDRV, and click OK. Files are copied to your computerÕs hard disk.

If you are installing drivers for Windows NT 3.51 for platforms other than i386, click Browse to locate the appropriate subdirectory under \PPDS95NT.DVRTEKMSDRV\WINNT351 on the printer's CD-ROM.

15.Decide if you want to print a test page, select Yes or No, and click

Finish.

16.In the Installation Completed dialog box, click Finish.

17.You may see a Restart Windows dialog box if the system needs to be updated. Decide if you want to restart now or later, and click OK.

User Manual 3-9