Tektronix Tektronix Color Printer, Phaser 360 user manual Selecting the Cleaning Page source

7Caring For Your Printer

The Cleaning Page

The Cleaning Page, a page with a series of narrow, colored stripes, is output each time the printhead is cleaned. More than one page may be printed. This occurs at the following times:

■When you run the cleaning procedure to eliminate light stripes in your prints (see page 8-12)

■During the printerÕs warming-up routine

■After emerging from Energy Star standby mode

1 Red 2 Green 3 Blue 4 Black

1 2 3 4

Phaser® 360 Cleaning Page

This page prints to maintain optimal print quality.

9922-137

Selecting the Cleaning Page source

The default source for the Cleaning Page or other paper that the printer uses in its cleaning procedures is the upper tray. When the Lower Paper Tray Assembly is installed, you can ensure that the printer always uses paper from the lower paper tray in its self-cleaning procedures by changing a setting in the printerÕs front panel as follows:

7-16Phaser 360 Color Printer