Tektronix Phaser 360 user manual Using both thumbs, push the tray in Þrmly until it latches

Getting Set Up 2

4.Install the maintenance tray by sliding it into the printer. Make sure that the tray slides in straight on both sides.

9922-38

5.Using both thumbs, push the tray in Þrmly until it latches.

9922-150

6.Close the front cover.

Caution If you move or ship the printer, be sure to remove the maintenance tray to protect the printer from damage. Refer to “Moving or shipping your printer” on page 7-2 for more information.

User Manual 2-9