Tektronix Phaser 360, Tektronix Color Printer Using the Tektronix driver for Windows, LPTx

Printing Basics 4

Using the Tektronix driver for Windows 3.1

To select printing options, follow these steps:

1.From the Control Panel, double-click the Printers icon.

2.In the Printers dialog box, choose your printer from the list of installed printers.

3.Click the Set As Default Printer button if you want to select your printer as the default.

4.Click the Connect button; the Connect dialog box appears.

5.Select the port your printer is connected to.

The printerÕs ConÞguration Page contains the information you need to set up the printerÕs port. Refer to ÒPrinting a ConÞguration PageÓ on page 2-25 for instructions on printing the ConÞguration Page.

Interface	Select	Then do the following
Parallel	LPTx	Go to Step 6.
Network	Network port	1. Click the Network button to open
	(LPTx or COMx)	the Printers-Network
		Connections dialog box.
		2. Fill in each item based on your
		configuration, then click OK.
		Refer to your Microsoft Windows
		documentation for details, or ask
		your network administrator for help.

Note You can use CONNECT TO FILE to save a document as a PostScript file instead of sending it to the printer. For more information, see your Microsoft Windows documentation.

User Manual 4-25