Tektronix Tektronix Color Printer, Phaser 360 user manual Network printer server, and click Next

3Installing Printer Software

6.The Finish Installation dialog box contains instructions for completing the printer software setup; click Next. The Add Printer Wizard program is automatically launched.

7.In the Add Printer Wizard, click Next in the opening dialog box.

8.Select printer management, either My computer or

Network printer server, and click Next.

9.Select a local printer port, or follow these instructions for a network port:

LPR port (for TCP/IP) setup instructions	AppleTalk port setup instructions
a. Click the Add Port button.	a. Click the Add Port button.
b. In the Printer Ports dialog box, under	b. In the Printer Ports dialog box, under Available Printer
Available Printer Ports, select LPR Port.	Ports, select AppleTalk Printing Devices.
c. Click the New Port button; the Add LPR	c. Click the New Port button.
compatible printer dialog box appears.	d. Under AppleTalk Printing Devices, double-click on the
d. For Name or address of host providing lpd,
	appropriate zone (if there are multiple AppleTalk zones).
type your printer’s IP address (or Host name if	e. Select your Tektronix printer and click OK.
known to the network).
	f. At the prompt: Do you want to capture this AppleTalk
Note: The printer’s IP address may be available
	Printing Device?, click No.
on the printer’s Configuration Page. If not, ask
	Note: Clicking Yes hides the printer from regular Macintosh
your network administrator.
e. For Name of printer or print queue on that	users, forcing them to use NT Server as a spooler, as long as
	NT Server allows sharing of this printer.
server, type in one of the following (use	g. Click OK.
uppercase letters):
■ PS for PostScript	h. In the Printer Ports dialog box, click the Close button to
■ AUTO for automatic selection	return to the Add Printer Wizard.
	i. Click Next and continue with Step 10 below.
f. Click OK.

g.In the Printer Ports dialog box, click the Close button to return to the Add Printer Wizard.

h.Click Next and continue with Step 10 below.

10.In the Manufacturers/Printers dialog box, click Have Disk.

11.Type in the drive for the CD-ROM or diskette, and click OK.

12.Select your Tektronix Phaser 360 printer, and click Next.

3-8Phaser 360 Color Printer