Care and cleaning of the range.

GEAppliances.com

Be sure all controls are off and all surfaces are cool before cleaning any part of the range.

If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is re-engaged properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury.

Safety Instructions

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape on new appliances is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape (on some models) must be removed from all chrome trim. It cannot be removed if it is baked on.

Operating

Groove Stem

Molded rib

Spring clip

Clear groove in stem

Control Knobs

The control knobs may be removed for easier

check the OFF position to insure proper

cleaning.

placement.

Before removing the knobs for cleaning,

Wash the knobs in soap and water or

please note that the knobs are in the

a vinegar and hot water solution but

OFF position. When replacing the knobs,

do not soak.

 

 

The knob stem has a groove in each

Replace the knob by fitting the molded

side. The groove on one side has a

rib inside the knob into the clear

spring clip. The other groove is clear

groove on the stem.

(see illustration). Check the inside of

 

the knob and find the molded rib.

 

Instructions Care and Cleaning

Flat Stem

The knob stem is flat on one side (see

Replace the knob by fitting the molded

illustration). Check the inside of the

flat area inside the knob onto the flat

Molded flat area

knob and find the molded flat area.

area of the stem.

 

Flat

Troubleshooting

Oven Vent

The oven vent is located behind the right rear surface unit.

This area could become hot during oven use.

It is normal for steam to come out of the vent and moisture may collect underneath it when the oven is in use.

The vent is important for proper air circulation. Never block this vent.

Tips

Control Panel

Deactivate the touch pads before cleaning.

See the Cooking/Self-Clean lockout information in the Special features of your oven control section in this manual.

Clean up splatters with a damp cloth.

You may also use a glass cleaner.

Remove heavier soil with warm soapy water. Do not use abrasives of any kind.

Reactivate the touch pads after cleaning.

See the Cooking/Self-Clean lockout information in the Special features of your oven control section in this

manual.27

Consumer Support

Page 27
Image 27
GE JBP91, 49-80117-1, 164D4290P075-1 owner manual Care and cleaning of the range, Operating, Tips, Safety Instructions

164D4290P075-1, 49-80117-1, JBP91 specifications

The GE JBP91 is a notable addition to the line of residential cooking appliances by General Electric, recognized for its innovative features and user-friendly design. This model, often identified with part numbers 49-80117-1 and 164D4290P075-1, is primarily a combination of conventional and modern technologies aimed at enhancing cooking efficiency and convenience in the kitchen.

One of the standout features of the GE JBP91 is its versatile cooking capabilities, which include both electric coil burners and a spacious oven. The electric burners provide consistent heat distribution, allowing for even cooking and simmering. With multiple heat settings, users can easily adjust the temperature to suit their specific cooking needs.

The oven features a self-cleaning option, which is an essential characteristic for busy households. This feature saves time and effort, allowing users to choose a self-cleaning cycle that utilizes high temperatures to eliminate food residue, thus ensuring a tidy and sanitary cooking environment. Additionally, the oven is equipped with a precision temperature control system, which promotes accurate cooking results and better meal preparation.

In terms of safety, the GE JBP91 incorporates several important technologies. The appliance features a built-in automatic shut-off system that engages after a specified period of inactivity, providing peace of mind for users who may forget to turn off the oven or burners. Furthermore, the appliance has heat-resistant door handles and a sturdy build, ensuring durability and resilience through regular use.

The design of the GE JBP91 is both sleek and practical, fitting seamlessly into various kitchen aesthetics. The control knobs are conveniently placed, offering easy access and operation. Moreover, the appliance includes a windowed oven door, enabling users to monitor cooking progress without opening the door and losing heat.

Energy efficiency is another highlight of the GE JBP91, as it adheres to modern standards for power consumption, making it an environmentally friendly choice for those looking to reduce their carbon footprint while enjoying high-quality cooking.

Overall, the GE JBP91, with its part numbers 49-80117-1 and 164D4290P075-1, represents an excellent balance of traditional cooking technology and modern appliance innovation, perfect for both novice cooks and seasoned chefs alike. With its dependable performance, safety features, and user-centric design, it stands out as a reliable cooking solution for any home.