Record mode
ªTo select the color for fade in/fade out
The color which appears in fading pictures can be selected.
1 Set [ADVANCED] >> [FADE COLOR] >> [BLACK] or [WHITE].
≥While the fade in/fade out function is selected, it takes several seconds to display the image when you start recording images. Besides, it also takes several seconds to pause recording.
Wind noise reduction function
This reduces the wind noise coming into the microphone when recording.
≥Set to Tape Recording Mode.
1Set [BASIC] >> [WIND CUT] >> [ON].
ªTo cancel the wind noise reduction
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥The default setting is [ON].
≥Reduces the wind noise depending on the wind strength. (If this function is activated in strong winds, the stereo effect may be reduced. When the wind weakens, the stereo effect will be restored.)
Auto Ground-Directional Standby (AGS)
This function prevents unnecessary recording when you forget to pause recording and walk with the Camcorder tilted upside down while recording continues.
≥If the Camcorder continues to be tilted upside down from the normal horizontal position while recording on a tape, it is automatically put into recording pause.
[AGS]: Auto
Set [SETUP] >> [AGS] >> [ON].
ªTo cancel Auto Ground-Directional
Standby
Set [SETUP] >> [AGS] >> [OFF].
≥The AGS function may activate and cause the Camcorder to pause the recording if you are recording a subject right above or right below you. In these cases, set [AGS] >> [OFF] then continue the recording.
≥Use the recording start/stop button to pause or stop the recording. The AGS function is only a backup function for when you forget to pause the recording.
≥The time it takes the Camcorder to be put into recording pause after being tilted upside down varies depending on the operating conditions.
36
LSQT1091
