TO SET SLEEP MODE
When you are going to sleep, select this feature and the unit will cool off the room to the desired temperature and then increase that temperature throughout the night.
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
3. Press the SLEEP button on the remote controller. The unit will then be in the sleep mode and will cool the room to the desired temperature. After a while the unit will in- crease the temperature again in the cooling
mode or decrease the temperature in the heat mode of the heat pump. This process will then repeat.
2.Press the MODE button to select the desired mode. Then, set the desired temperature using the TEMP. ▲ or ▼ buttons.
TO CANCEL SLEEP MODE:
To cancel sleep mode,
press the SLEEP button | AUTO | ||
|
|
| |
again; the SLEEP indicator |
|
|
|
will disappear in the dis- |
|
|
|
play. |
|
|
|
|
|
| |
TO SET TURBO/MILD MODE
1.The unit is fixed “MILD” mode on production.
2.Press the “TURBO/MILD” button for powerful cooling.
3.When press the “TURBO/MILD” button one more time, it will be back to “MILD” mode.
EMERGENCY OPERATION
If the remote control is lost, broken or has no batteries, follow the procedures below:
1.Open the indoor unit’s cover and make sure the EMERGENCY/REMOTE switch is set to the EMER- GENCY position.
2.The unit will then turn on and depending on the room temperature, it will select the cool or heat, fan speed and fan direction automatically.
EMERGENCY/REMOTE Switch
EMR. REMOCON
3. To turn the unit off, slide or push the EMERGENCY/ REMOTE switch to the REMOTE position.
14
