Hot Food Deli Case | Maintenance |
Case Joining Trim
1.After leveling the cases and bolting the bases together, bolt the canopies together as shown in Fig. 6 with a
2.Mount the Upper Front & Base Front Joint Trims by holding them in place and marking the hole locations on the case.
3.Make certain the joint covers are centered on the joint and that they align vertically with each other.
4.Drill the case holes 5/32” and attach joint covers with screws provided. Before tightening the top screws of the Upper Front Trim, slide the Counter Front Trim in place between the screw head and the Upper Front Trim.
5.Attach Bumper Ends and Bumper Mounting Base to the front of the cases, centered on the vertical surface of the upper front of the case. Cut the Bumper Top to length to fit between the Bumper Ends and snap into place.
Figure 6. Joining WDCTY Cases
Maintenance
15
