Setting Up Your Answering Machine
Answering Machine Setting
To set the following six functions you must enter the menu mode.
| • With the phone in standby, use [menu/clock] to scroll through the menu options. | |
menu/clock | The system returns to standby and sounds a tone after the last menu option. | |
• If any of the following occurs during menu setup, the system returns to standby, and | ||
| ||
| you will have to start over with the procedure you were performing: | |
menu/clock | - [talk/flash] is pressed | |
| - [ ] (play/stop) is pressed | |
menu/clock | - 10 seconds elapse without a key press | |
- An incoming call is received | ||
| ||
| • If the system remains idle for five seconds after the announcement, the system returns | |
menu/clock | to standby. Once [vol/select/ ] or [vol/select/ ] is pressed, the idle time is extended | |
| to 10 seconds. |
| Note: | |
menu/clock | • | For your convenience, voice prompts will guide you through the menu |
|
| mode. |
menu/clock | • | After the setting, press [ ] (play/stop) to exit the menu mode, or [menu/ |
| clock] to move to the next menu option. | |
|
|
menu/clock
30