Uniden EXAI4581, EXAI4580 manual Liquid Damage, Handset Base

Page 53

Liquid Damage

Moisture and liquid can damage your cordless phone.

•If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.

•If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below:

		Handset		Base
	1)	Remove the battery cover and leave it off for ventilation.
	2)	Disconnect the battery pack. Leave the battery cover off	1)	Disconnect the AC adapter from the base,
		and the battery pack disconnected for at least 3 days.	1)	Disconnect the AC adapter from the base,
		and the battery pack disconnected for at least 3 days.		cutting off electrical power.
	3)	Once the handset is completely dry, reconnect the		cutting off electrical power.
	3)	Once the handset is completely dry, reconnect the	2)	Disconnect the telephone cord from the base.
		battery pack and the battery cover.	2)	Disconnect the telephone cord from the base.
		battery pack and the battery cover.	3)	Let dry for at least 3 days.
	4)	Recharge the handset's battery pack for 15 to 20 hours	3)	Let dry for at least 3 days.
	4)	Recharge the handset's battery pack for 15 to 20 hours
		before using.

IMPORTANT:

You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline. See back cover page for contact information.

52

Image 53

Contents Page Contents Welcome AccessibilityManual Conventions TerminologyProduct Overview Main Phone FeaturesAnswering Machine Features Handset Controls and FunctionsMenu/clock key Set key Main Base Unit25 24. charge/in use LED Ringer key Memo key Find handset key Greet keyChoosing the Best Location Installing the PhoneInstalling the Rechargeable Battery Pack into the Handset Installing the Base Unit Modular Standard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting Activating Caller ID on Call Waiting Basic SetupActivating AutoTalk Programming Your Area Code Choosing the Dialing Mode Setting the Language Storing a Name and Number in Memory Using the Speed Dial MemoryNumber of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Making a Call from Speed Dial Memory Using Your PhoneMaking and Receiving Calls Making a Call from the Caller ID List To cancel speed dialingAdjusting the Earpiece Volume Selecting the Ring Tone and VolumeRedialing the Last Dialed Number Temporarily Mute RingerSelecting a Different Channel Using Call WaitingFind Handset Tone Dialing Switch-overCaller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Caller ID on Call Waiting CidcwDeleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Press delete/channelIntegrated Answering Machine FeaturesAnswering Machine Setting Setting Up Your Answering MachineSetting the Time Setting a Personal Security Code PIN Selecting the Message Record Time Setting the Ring TimePress vol/select/ or vol/select/ to make your selection Setting the Message Alert ToneSelecting the Language Setting Your Outgoing Message GreetingPreset message Choosing between the two outgoing messages Recording a personal outgoing message GreetingTemporarily Mute the Base Ringer and Call Screen Setting the Base Ringer VolumeAdjusting the Speaker Volume Level Turning the Answering Machine On/Off Using Your Answering MachineDay it was received Reviewing MessagesMessages Recording a Conversation Handset Operation Voice MemoPage Remote Operation Turn on the Answering Machine Remotely Changing the Digital Security Code Power Failure MaintenanceSpecifications Talk and Standby Times Low battery alertCleaning the battery charging contacts Battery replacement and handlingCommon Issues TroubleshootingSymptom Suggestion Charge/in use LED wont Traveling Out-of-RangeSymptom Suggestion Adjust the speaker volume on the base unit Handset Base Liquid DamageRechargeable Nickel-Cadmium Battery Warning PrecautionsFCC Wants You To Know Important Safety InstructionsShown on the label Radio InterferenceRadio Equipment Cordless Telephone PrivacyTerminal Equipment One Year Limited Warranty F, G, H, I, J, K, L IndexO, P, Q X, Y, ZMemo Remote Operation Card Memory Location Memo Remote Operation CardTask Key At Uniden, we’ll take care of you