Setting the Base Ringer Volume
The base has three ringer volume settings: high, low, and off. You can change the ringer volume while in standby or while an incoming call is ringing.
1) Press [ringer]. You hear the ringer at the current volume level ([ 
] High, [ 
] Low, [ 
] off) (if you set the base ringer volume to off, "Ringer off" is announced) and it is displayed on the base.
2) Press [ringer] repeatedly until the desired ringer option appears.
3) The system displays the new ringer volume.
Note: Even when the base ringer is turned off, the handset will still ring.
Temporarily Mute the Base Ringer and Call Screen
Press [ 
] (play/stop) to temporarily mute the incoming ring and call screen. The ringer will sound with the next incoming call. To turn the ringer back on for this call, press [ringer]. To hear the answering machine and screen this call, press [vol/select/
] or [vol/select/
].
Adjusting the Speaker Volume Level
You can adjust the volume of the base speaker by pressing [vol/select/
] or [vol/select/
] on the base. Press [vol/select/
] for louder or [vol/select/
] for softer while the base speaker is being used except for menu mode. The numbers [ 
] - [ 
] are displayed on the base indicating the volume levels. [ 
] being the softest and [ 
] being the loudest.
37