4.Place the telephone cord into the right molded channel cord holder and plug the other end of the cord into the wall jack. (Remember, the phone must be fully charged before you can use it.)
5.Place the base on the two posts of the wall plate and slide downward to secure.
6.Plug the AC adapter into a standard 120 V AC wall outlet that is not controlled by a wall switch.
Use only the AC adapter that came with the phone.
7. Raise the antenna on the base.
▼Mounting Directly on a Wall
If you do not have a standard wall plate, you can mount the phone directly on a wall. Before mounting your cordless telephone, consider the following:
∙Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
∙Make sure the wall material is capable of supporting the weight of the base and handset; otherwise, damage to the unit could result.
∙Use #10 screws (minimum length of
be placed.
1. Insert the screws, with their appropriate anchoring devices,
2. Plug the AC adapter into the base.
3.Place the AC adapter cord inside the left molded channel cord holder.
4.Plug one end of the long telephone cord into the TEL LINE jack on the base.
5.Place the telephone cord into the right molded channel cord holder.
6.Place the base on the screws and push down until it’s firmly seated.
7.Plug the other end of the telephone line into the telephone wall jack. (Remember, the phone must be fully charged before you can use it.)
8.Plug the AC adapter into a standard 120 V AC wall outlet that is not controlled by a wall switch.
Use only the AC adapter that came with the phone.
9. Raise the antenna on the base.
7