Setting Up Your Phone, Using Your Phone

Setting Up Your Phone

Raising the Antenna

Before using your phone, be sure to raise its antenna to the vertical position.

2.The phone has two ringer tones, each with two volume levels. Press volume again until you hear the ringer tone and volume level you want.

1.While you are on a call, press volume .

2.The phone has three receiver volume levels: normal, high and loud. Press volume again until you hear the volume level you want.

When you hang up, the phone keeps the last volume setting selected.

		Handset on Base		Handset off Base
Answer	When the phone rings, remove the handset		Press talk.
call	from the base. (AutoTalk)
	1.	Remove the handset from the base and	1.	Pick up the handset and press talk.
		press talk.	2.	The talk LED lights.
Make call	2. The talk LED lights.		3.	Listen for the dial tone.
	3.	Listen for the dial tone.	4.	Dial the number.
	4.	Dial the number.
Hang up	Return handset to the base. (AutoStandby)		Press talk.
	1.	Remove the handset from the base and	1.	Pick up the handset and press talk .
Redial		press talk.	2.	Listen for the dial tone.
Redial	2.	Listen for the dial tone.	3.	Press redial to dial the number.
	2.	Listen for the dial tone.	3.	Press redial to dial the number.
	3.	Press redial to dial the number.

Your EXP 6900 Series phone has 10 memory locations for storing important telephone numbers.

1.Remove the handset from the base and press mem. The talk LED flashes.

2.Enter the phone number you want to store (up to 16 digits).

You have 20 seconds after pressing mem to enter the number you wish to store. Otherwise, an error tone will sound.

3.Press mem and enter a number (0-9) on the keypad for the memory location you want to use.