Erasing a Stored Number, Replacing a Stored Number

Erasing a Stored Number

1.Remove the handset from the base.

2.Press mem twice.

3.Press the memory location number (0-9) you want to clear. You hear a long beep confirming that you have erased the number.

Replacing a Stored Number

Remember, your EXP 6900 Series phone has 10 memory locations, represented by the numbers 0-9 on the keypad. If you store a phone number in one of these locations, then attempt to store a different number in the same location later, the new number will replace the previous one.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the phone channel for clearer operation. Interference can come from appliances or other phones in your home. This function works only when the phone is in use.

The chan button on the handset allows you to choose between 30 factory set channels. During the course of a conversation, if you hear static or noise which makes it difficult to hear, press chan. The talk LED flashes, indicating the phone is changing to another channel.

Using the Flash Button

Use flash for accessing services such as call waiting. If you receive a call during your conversation, press the flash button on the handset. Press flash again to return to the previous call.

Using the Page/Find Feature

The Page/Find feature sends a signal from the base to the handset causing it to beep. This is useful for locating the handset when it is away from the base. To use this feature, press page/find on the base. The handset beeps for 60 seconds.

The paging feature does not work when the phone is in use.

On the handset, press any key to end the page. If you press talk, you must press talk again if you do not wish to make a call.

Traveling Out of Range

During a call, as you begin to move too far from your base unit, noise increases. If you pass the range limits of the base, your call will terminate within 30 seconds.