Uniden EXI 386 Series manual Connect the base unit, For assistance Modular

Page 13

C. Connect the base unit

1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2) Set the base on a desk or tabletop, and place the handset in the base unit.

3) Make sure that the status LED illuminates. If the LED does not illuminate, check to see

that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

• Use only the supplied AD-310 AC adapter. Do not use any other AC adapter.

• Connect the AC adapter to a continuous power supply.

•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

•After installing the battery pack in the handset, charge your handset at least 15-20 hours before plugging into the phone line. Once the handset battery pack is fully charged, connect the telephone line cord to the base and telephone wall outlet.

4)Connect the telephone line cord to the TEL LINE jack and to a telephone outlet once the handset is fully charged.

If your telephone outlet isn't modular, contact your telephone company

for assistance.

Modular

Place the handset in the base with the keypad facing forward for charging.

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

GETTING STARTED

G E T T I N G S T A R T E D [ 11 ]

Image 13

Contents Page Page Contents Welcome FeaturesQuick Reference Guide Controls and Functions Status LED 9 to Read this FirstChecking the Package Contents Choose the best location Setting up the PhoneDo the following steps See Cleaning the battery charging contacts Low Battery AlertFor assistance Modular Connect the base unitStandard wall plate mounting Mounting the Base Unit on a WallDirect wall mounting TerminologyCaller ID options Setting Menu OptionsChoosing the dialing mode Setting the Language Handset On Base Handset Off Base Making and Receiving CallsHandset ringer tone and volume Adjusting the Handset Ringer and Earpiece VolumeEarpiece volume Ringer MuteRedial Tone Dialing Switch overTraveling Out-of-Range Selecting a Different Channel HintsFlash and Call Waiting Memory Dialing Storing Phone Numbers and NamesE M O R Y D I a L I N G If you make a mistake while entering a name Steps for Entering Names and Special CharactersNumber of times key is pressed E M O R Y D I a L I N G Making Calls with Memory Dialing Memory dialing from Standby ModeDisplay a Programmed Number Chain Dialing Memory dialing from Talk ModePress and hold mem until ¨Memory Store¨ is displayed Editing a Stored Name and/or Phone NumberUniden Corp John DOE Erasing a Stored Name and Phone Number Storing and Editing the RocketDial RocketDialMaking Calls with the RocketDial Rocketdial Deleting the RocketDialYou must subscribe to Caller ID service to use this feature When the Telephone RingsCaller ID Viewing the Caller ID Message List When the pointer is at ¨No¨ When the pointer is at ¨Yes¨Deleting Information from the Caller ID List Deleting a Caller ID messageTone sounds and all stored Caller ID messages are deleted Calling a party from the Caller ID list Using the Caller ID ListDial edit Storing Caller ID messages in Memory dialing Headset Installation Installing the BeltclipChanging the Digital Security Code To attach the beltclipBattery replacement and handling MaintenancePower Failure Symptom Suggestion TroubleshootingSymptom Suggestion Case Action Liquid DamageGeneral Information Battery InformationAC Adapter Information Precautions Installation Considerations Terminal Equipment Radio Equipment K, L IndexMemo At Uniden, we´ll take care of you