If you select a memory location that does not have a stored number, the handset will beep rapidly, and the phone will not dial.
Memory dialing from Talk Mode
1) Press talk/flash. ¨Talk¨ and theTalk volume setting appears.
2)Press mem.
3)Enter a number (0 - 9) to select the memory location of the desired phone number. The selected phone number is displayed, and then the number is dialed.
4)To hang up, press end.
Talk
Volume High
Talk 0:00
Talk 0:35 0123456789012
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and are prompted to enter the account number, simply press mem and the location number where the special number has been stored.
Store your special number with an identifying name. (Refer to "Storing Phone Numbers and Names" on page 21.)