Mounting the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1 | 1 Snap the wall mount |
adapter into the |
notches on the base.
2 Plug the telephone line cord to the
TEL LINE jack and the AC adapter to the DC IN 10V jack.
3 Plug the telephone line cord into the telephone outlet.
4 Wrap the AC adapter
2 - 7 6cord inside the molded wiring
2channel. Then wrap the cord around the
strain relief notch.
4
Wall plate
7
3
7
5
AC adapter
AC outlet
5 Plug the AC adapter into a standard
120V AC wall outlet.
6 Raise the antenna to a vertical position.
7 Align the mounting slots on the base. with the mounting posts on the wall. Push in and down until the phone is firmly seated.
7