Uniden EXS 9980 manual Direct wall plate mounting

Page 12

If you have wall mounted the base, you must remove the beltclip to charge the handset facing forward.

8 On the base unit, pull the

Handset retainer

handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset

in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws with anchoring devices suitable for the wall material where the base unit will be placed.

TOP

1 Insert two mounting screws

 

 

 

 

 

 

 

3/16 in.

 

 

 

 

 

 

 

into the wall, (with their

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appropriate anchoring device),

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-15/16 inches apart. Allow

 

 

 

 

 

 

 

 

about 3/16 of an inch between

 

 

 

 

 

 

 

3-15/16 in.

the wall and screwheads for

 

 

 

 

 

 

 

 

mounting the phone.

 

 

 

 

 

 

 

 

2 Refer to steps 1 through 9 on

 

 

 

 

 

 

 

 

page 7 and 8 to mount the

 

 

 

 

 

 

 

 

telephone.

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Features IntroductionControls and functions Talk Flash46 47 48 Contents Read this first 4 to9 to About the digital security codeChecking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Charging optional battery packs Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsMaking a call On-hook dialingExample Other OperationsOff-hook dialing Talk HighTalk 017 1003AutoTalk when ringing Any key answer when ringingReceiving a call From the handsetFrom the base Adjusting the volume Ringer volumeEarpiece volume Base ringer switchRedialing a call On-hook redialingRedial2 Redial3Off-hook redialing Talk Talk HighUsing the speakerphone Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Using your EXS 9980 intercom Intercom from the base to handsetIntercom from the handset to base When speaking on the handset When phone is ringingMute Storing phone numbers and names Memory StoreStore Name Edit Memory07 Delete Memory07 Go BackStore Number Memory07 StoredMaking calls with memory dialing On-hook memory dialingDisplay a Programmed Number Off-hook memory dialing Talk 035Editing a stored name and/or phone number Memory Store 01 Uniden Corp 02 John DOEMemory01 Stored Memory Store isErasing a stored name and phone number When speaking on the handset When speaking on the baseWay conferencing Setting Caller ID options Caller IDAuto TalkOff Area CodeWhen the telephone rings 11 1230PM1230PM 813-8 3300Long Distance call setting and cancellation Viewing the Caller ID Message listNew Total02 17 1230PM Uniden CorpWhen the pointer is at Yes When the pointer is at NoDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Delete All ? YesTotal00 Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Dial editStoring Caller ID messages in Memory dialing Select LocationReplace Memory ? Using Caller ID on call waiting service Talk Uniden CorpIntegrateddeviceanswering Integrated answering deviceSetting the clock Setting your greeting » Preset Message» Recording your personal outgoing message Greeting » Choosing between the two outgoing messages» Announce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Using your answering system Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memo» Deleting individual message » Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Changing the digital security code Additional InformationInstalling the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingPower Failure Troubleshooting Symptom SuggestionSymptom Suggestion Specifications GeneralBase unit HandsetIndex K, LW, X, Y, Z Page
Top Page Image Contents