Uniden EXS 9910 manual Maintenance, Battery replacement and handling

Page 25

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

Ni-CdPROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

Use the specified battery pack.

Do not remove the battery from the handset to charge it.

Never throw the battery into a fire, disassemble it, or heat it.

Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

22

Image 25
Contents Page Introduction FeaturesTalk Flash Controls and functions25 26 Contents Base unit Read this firstHandset Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemDC in 9V jack Direct wall plate mounting Installing the handset battery pack Battery use time per charge Charging optional battery packsWhen the battery charge becomes low Cleaning the battery contactsAutomatic digital code security Other Operations Making a callHandset on the base Receiving a callHandset off the base Flash and Call Waiting Adjusting the ringer and earpiece volumeMute Redialing a callTo locate the handset while it’s off Using page featureBase, press page/find on the base Handset beeps for 15 secondsStoring phone numbers One-touch memory dialing Making calls with memory dialing Memory dialingErasing a stored phone number Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingGeneral SpecificationsBase unit HandsetV, W, X, Y, Z IndexJ, K, L