Uniden EXS 9910 manual Storing phone numbers

Page 21

You must press a key within 30 seconds or the phone will return to standby. If you return the handset in the cradle, the phone will return to standby too.

Storing phone numbers

Your EXS 9910 stores up to 24 numbers in the handset.

1 Press mem while in standby mode. The talk/batt LED flashes.

2 Dial the number you wish to store (up to 16 digits).

3 Press mem again.

4 Enter a two-digit number (01 - 20) or press one of the One-touch memory keys ( m1 - m4 ) to select the memory location where you wish to store the number.

5 The talk/batt LED goes out.

A confirmation beep indicates the number has been stored.

MEMORY DIALING

Use the supplied memo sticker to write stored numbers.

18

Image 21

Contents Page Introduction FeaturesTalk Flash Controls and functions25 26 Contents Read this first Base unitHandset Checking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemDC in 9V jack Direct wall plate mounting Installing the handset battery pack Battery use time per charge Charging optional battery packsWhen the battery charge becomes low Cleaning the battery contactsAutomatic digital code security Other Operations Making a callReceiving a call Handset on the baseHandset off the base Flash and Call Waiting Adjusting the ringer and earpiece volumeMute Redialing a callTo locate the handset while it’s off Using page featureBase, press page/find on the base Handset beeps for 15 secondsStoring phone numbers One-touch memory dialing Making calls with memory dialing Memory dialingErasing a stored phone number Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingGeneral SpecificationsBase unit HandsetIndex V, W, X, Y, ZJ, K, L