TROUBLESHOOTING
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom | Suggestion |
|
|
The status LED won't | • Make sure the AC adapter is plugged |
come on when the | into the base unit and wall outlet. |
handset is placed in | • Make sure the handset is properly |
the base unit. | seated in the base unit. |
| • Make sure the charging contacts on the |
| handset and base unit are clean. |
|
|
The audio sounds | • Make sure that the base unit antenna is |
weak and/or scratchy. | in a vertical position. |
| • Move the handset and or base unit to a |
| different location away from metal |
| objects or appliances and try again. |
| • Make sure that you are not too far from |
| the base. |
|
|
Can't make or receive | • Check both ends of the base unit |
calls. | telephone line cord. |
| • Make sure the AC adapter is plugged |
| into the base unit and wall outlet. |
| • Disconnect the AC adapter for a few |
| minutes, then reconnect it. |
| • Make sure talk is pressed. |
|
|
The handset doesn't | • The battery pack may be weak. Charge |
ring or receive a page. | the battery on the base unit for more |
| than 16 hours. |
| • The handset may be too far away from |
| the base unit. |
| • Place the base unit away from |
| appliances or metal objects. |
| • Make sure Ringer switch is ON. |
|
|
23