Uniden EXS9600 specifications Cleaning the Battery Contacts, Setting the PULSE/TONE Switch

Page 13

Color profile: Disabled Composite Default screen

TIP

Most phone systems use tone dialing. Check with your local phone company if you’re not sure whether your system is tone or pulse.

12

▼Low battery indicator

When the battery pack is very low and

needs to be charged, the phone isLow Battery programmed to eliminate functions in

order to save power. If the phone is not in

use, Low Battery flashes. If the phone is in use, Low Battery flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base for charging.

CLEANING THE BATTERY CONTACTS

To maintain a good charge, clean all charging contacts on the handset and base about once a month with a pencil eraser or other contact cleaner. DO NOT use liquids or solvents; you may damage your phone.

SETTING THE PULSE/TONE SWITCH

Be sure the PULSE/TONE switch is in the TONE position unless your local phone system uses pulse dialing.

C:\LaDonna\Exs9600\EXS9600.vp Tue Dec 01 11:28:41 1998

Image 13

Contents Contents Spectrum technology T RIncluded in Your Package Rechargeable Battery Short Telephone CordHandset Base Long Telephone Cord Desktop/ Wall MountInstall I N G a N D a D J U S T I N G DESK/TABLETOP InstallationStandard wall plate mounting Wall InstallationAttach the desktop stand to the base Phone is firmly seated \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112823 Direct wall mounting \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112832 Slide the battery cover on until it snaps into place Installing the Handset Battery PackInitial battery charging Charging the Battery PackCharging optional battery packs Place the handset on the baseSetting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Handset ringer volume Adjusting the Handset Volume ControlsHandset earpiece volume I N G a N D a D J U S T I N GTo attach the beltclip Installing the BeltclipTo remove the beltclip To reset the digital security code Headset InstallationAutomatic Digital Code Security I N G Y O U R P H O N EFlash and Call Waiting Making and Receiving CallsRemove the handset from the base Storing a Phone Number in MemoryFollowing screen appears Press select. The following screenScreen and any saved numbers Editing a Phone Number in MemoryYou have selected in the display With cursor next to Edit MemoryErasing a Number from Memory Use the key to move the cursor to the Yes commandO N E Press select. The following confirmation screen appearsTraveling OUT-OF-RANGE Using Memory DialingSetting up Caller ID options Using Caller IDTo change your Caller ID options Press setup. The following Screen appearsReviewing Caller ID messages Screening your callsStoring a Caller ID number into a memory location Calling a Caller ID numberDeleting all Caller ID messages Deleting a Caller ID messageUsing the Tone Feature Using RedialPress call id to return to standby Set to pulseUsing the page Feature Quick Reference Chart Receive a O UBase Gener ALHandset Controls and Functions