Uniden EXS9600 specifications Making and Receiving Calls, Flash and Call Waiting

Page 17

Color profile: Disabled Composite Default screen

USING 16

YOUR NEW PHONE

MAKING AND RECEIVING CALLS

Handset

Handset

On Base

Off Base

To answer

1)

Pick up the handset.

1)

Press any key.

2)

If not in Autotalk Mode,

2)

If not in Autotalk Mode,

a call

press talk.

press talk.

 

 

 

 

 

 

1)

Pick up the handset.

1) Press talk.

2)Press talk.2) Listen for the dial tone.

3)Listen for the dial tone. 3) Dial the number.

To make

4) Dial the number.

 

 

a call

 

OR

 

OR

 

 

 

 

Dial the number, then

Dial the number, then

 

press talk.

press talk.

 

 

 

To hang up

Press talk, or return the handset to the

 

base (AutoStandby).

 

 

 

1)

Pick up the handset.

1)

Press talk.

To redial

2)

Press talk.

2)

Listen for the dial tone.

3)

Listen for the dial tone.

3)

Press redial.

 

 

4)

Press redial.

 

 

 

 

 

 

 

FLASH AND CALL WAITING

If you have “call waiting” service and a call waiting tone sounds while you are on a call, press flash to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press flash again.

C:\LaDonna\Exs9600\EXS9600.vp Tue Dec 01 11:28:55 1998

Image 17
Contents Contents Spectrum technology T RIncluded in Your Package Rechargeable Battery Short Telephone CordHandset Base Long Telephone Cord Desktop/ Wall MountInstall I N G a N D a D J U S T I N G DESK/TABLETOP InstallationAttach the desktop stand to the base Wall InstallationStandard wall plate mounting Phone is firmly seated \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112823 Direct wall mounting \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112832 Slide the battery cover on until it snaps into place Installing the Handset Battery PackInitial battery charging Charging the Battery PackCharging optional battery packs Place the handset on the baseLow battery indicator Cleaning the Battery ContactsSetting the PULSE/TONE Switch Handset ringer volume Adjusting the Handset Volume ControlsHandset earpiece volume I N G a N D a D J U S T I N GTo remove the beltclip Installing the BeltclipTo attach the beltclip To reset the digital security code Headset InstallationAutomatic Digital Code Security I N G Y O U R P H O N EFlash and Call Waiting Making and Receiving CallsRemove the handset from the base Storing a Phone Number in MemoryFollowing screen appears Press select. The following screenScreen and any saved numbers Editing a Phone Number in MemoryYou have selected in the display With cursor next to Edit MemoryErasing a Number from Memory Use the key to move the cursor to the Yes commandO N E Press select. The following confirmation screen appearsTraveling OUT-OF-RANGE Using Memory DialingSetting up Caller ID options Using Caller IDTo change your Caller ID options Press setup. The following Screen appearsReviewing Caller ID messages Screening your callsStoring a Caller ID number into a memory location Calling a Caller ID numberDeleting all Caller ID messages Deleting a Caller ID messageUsing the Tone Feature Using RedialPress call id to return to standby Set to pulseUsing the page Feature Quick Reference Chart Receive a O UHandset Gener ALBase Controls and Functions