Uniden EXS9600 specifications Phone is firmly seated

Page 6

Color profile: Disabled Composite Default screen

DO NOT use an outlet controlled by a wall switch.

Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery (refer to “Charging the Battery Pack,” page 11).

3)Plug the AC adapter cord into the 9 VDC input jack on the back of the base.

4)Put the AC adapter cord inside the molded wiring channel, then wrap it

around the strain relief notch. Plug the AC adapter into a standard 120 VAC wall outlet.

5) Plug one end of the short telephone cord into the TEL LINE jack on the back of the base, then plug the other end into a standard telephone jack.

6)Line up the mounting slots on the base with the mounting posts on the wall, then push in and down until the

phone is firmly seated.

I N S T A L L I N G A N D A D J U S T I N G

C:\LaDonna\Exs9600\EXS9600.vp

Tue Dec 01 11:28:20 1998

Image 6

Contents Contents T R Spectrum technologyHandset Base Rechargeable Battery Short Telephone CordIncluded in Your Package Long Telephone Cord Desktop/ Wall MountDESK/TABLETOP Installation Install I N G a N D a D J U S T I N GWall Installation Standard wall plate mountingAttach the desktop stand to the base Phone is firmly seated \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112823 Direct wall mounting \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112832 Installing the Handset Battery Pack Slide the battery cover on until it snaps into placeCharging optional battery packs Charging the Battery PackInitial battery charging Place the handset on the baseCleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator Handset earpiece volume Adjusting the Handset Volume ControlsHandset ringer volume I N G a N D a D J U S T I N GInstalling the Beltclip To attach the beltclipTo remove the beltclip Automatic Digital Code Security Headset InstallationTo reset the digital security code I N G Y O U R P H O N EMaking and Receiving Calls Flash and Call WaitingFollowing screen appears Storing a Phone Number in MemoryRemove the handset from the base Press select. The following screenYou have selected in the display Editing a Phone Number in MemoryScreen and any saved numbers With cursor next to Edit MemoryO N E Use the key to move the cursor to the Yes commandErasing a Number from Memory Press select. The following confirmation screen appearsUsing Memory Dialing Traveling OUT-OF-RANGETo change your Caller ID options Press setup. The following Using Caller IDSetting up Caller ID options Screen appearsScreening your calls Reviewing Caller ID messagesCalling a Caller ID number Storing a Caller ID number into a memory locationDeleting a Caller ID message Deleting all Caller ID messagesPress call id to return to standby Using RedialUsing the Tone Feature Set to pulseUsing the page Feature Quick Reference Chart O U Receive aGener AL BaseHandset Controls and Functions