Color profile: Disabled
Composite Default screen
▼Calling a Caller ID number
1)Press call id, and the Caller ID summary screen appears. The screen shows the number of new messages and
total messages.
2)Select the number that you would like to dial. Press ; to scan forward through the messages and : to scan backwards through the list.
New : 01
Total : 02
12/21 12:30PM 03 Schlitz Kaysie 8175551212
NOTE
If you select No, then the Caller ID screen returns.
3) Press talk and the number automatically dials.
▼ Storing a Caller ID number into a memory location
1)Press call id, and the Caller ID summary
screen appears. The screen shows the number of new messages and
total messages.
2) Press ; or : to find the message that you would like to store, then press memory to store the selected message.
3) The select location screen appears. Use
the : and ; keys to select a blank memory location where you would like to store the number. (If you want to replace
an existing number with the Caller ID number, skip to step 5.)
4)Press select. A confirmation tone sounds, and the number is programmed. (Do not complete steps 5 and 6.)
5) If you choose to replace an existing |
|
Replace Memory? | |
number with the Caller ID number, press | Yes |
select, and the following screen appears. | >No |
|
|
6)Use the : key to move the cursor to Yes and press select. A confirmation tone sounds, and the number is programmed.
23
U S I N G Y O U R P H O N E
C:\LaDonna\Exs9600\EXS9600.vp Tue Dec 01 11:29:11 1998