Uniden TRUc46 Connect the Charger, Low battery alert, Cleaning the battery charging contacts

Page 4

Low battery alert

When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is in the standby mode, ”Low Battery” appears on the LCD and none of the keys will operate. If the phone is in use, ”Low Battery” appears and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

Cleaning the battery charging contacts

To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth or a pencil eraser about once a month.

Do not use any liquids or solvents.

contacts

Connect the Charger

1 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2 Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward.

3 Make sure that the

charger LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

Use only the supplied AD-446

Polarity of the plug

AC adapter. Do not use any other

 

AC adapter.

 

• Place the charger close to the AC

 

outlet so that you can unplug the

 

AC adapter easily.

 

HS2” appears on the display while the handset is charging.

– 4 –

Image 4
Contents N E R S M a N U a L Checking the Package Contents WelcomeBattery Information Install the Battery PackBattery use time per charge Cleaning the battery charging contacts Low battery alertConnect the Charger Register the Handset For TRU446/TRU4465/TRU448/TRU4485 unitFor TRUC46 Card Phone unit You need to register the TXC400 before useCall Transfer Feature Press talk/flash or xfer/delOne Year Limited Warranty Uniden America Corporation