Entering a Pause in Memory Dialing
If you would like to use a phone number stored in memory to access voice mail, for example, you can store a pause in the phone number sequence.
To use this function, follow steps 1 and 2 in “Storing a Number in Memory “ , then press the pause button on the handset to place a pause in the phone number sequence. Each pause counts as one digit and represents a two second delay of time between the digits.
Follow the remaining steps in the “Storing a Number in Memory“ section to complete the operation.
Storing Mixed Tone/Pulse Numbers
If your phone is set up for pulse dialing, you can store a mixed mode number (up to 20 digits) to easily access long distance services.
1.Remove the handset from the base and press memory. The talk/battery low LED flashes.
2.Enter the number to be dialed in pulse mode.
3.Press the tone button on the handset. The tone button counts as one digit and enters a pause.
4.Enter the number(s) to be dialed in tone mode.
5.Press memory and a number
Remember, the phone number you wish to store cannot have more than
20 digits, including the pause. (The pause button counts as one digit.)