•The paging feature does not work when the phone is in use.
•When an incoming call is received during paging, paging is canceled and the telephone is switched to the incoming call.
Using the Flash Button
Use the flash button for accessing services such as call waiting. (You must subscribe to Call Waiting service from your phone company to use this feature.) If you receive a call during your conversation, press the flash button on the handset. Press the flash button again to return to the previous call.
Using the Page/Find Feature
The Page/Find feature sends a signal from the base to the handset causing it to beep. This is useful for locating the handset when it is away from the base. To use this feature, press page on the base. The handset beeps for 5 seconds. (Press and hold the page button for more than 2 seconds, to get a continuous beep for a minute.)
If you hold down page more than a minute, the handset beeps until you release page.
Press any key on the handset to end the page.
Note: If you press talk during paging, the handset will be placed in the
Traveling Out of Range
During a call, as you begin to move too far from the base unit, noise increases. If you pass the range limits of the base, your call will terminate within 30 seconds.
[14 ] U S I N G Y O U R P H O N E