Wall Mounting the Base
This phone can be mounted on any standard wall plate.
) Snap the wall mount adapter into the notches on the base top.
2)Plug the AC adapter into the DC IN 9V jack.
3)Wrap the AC adapter cord inside the molded wiring channel as
shown.
4) Plug the AC adapter into a standard 120V AC wall outlet.
5) Plug the telephone cord into the TEL LINE jack.
6) Plug the telephone cord into the telephone wall jack.
7) Align the mounting slots on the base with the mounting posts on
the wall. Then push in and down until the phone is firmly seated.
Notes: |
|
• DO NOT use an AC outlet controlled by a wall switch. | Wall plate |
• To mount the phone directly on the wall, insert two #10 screws |
|
(minimum length of 1 3/8 inches, not supplied) into the wall, 3 15/16 |
|
inches apart; leave the screw heads 1/8 inch away from the wall to |
|
allow room for mounting the phone. Be sure the wall is capable |
|
of supporting the weight of the phone, and use the proper type of |
|
anchoring device for the wall material. |
|
AC adapter (supplied)
AC outlet
16